GameServers PBSS

c5.Wafflesc5.Waffles Posts: 39Player
So, working on setting up PBSS on our servers, seem to run into a snag and cant figure it out. I have the settings put in based on the pbbans pbsv.cfg setup. but i cant seem to get it to actually take a screenshot or its saving somewhere weird. I am also wondering about the PB web tool setup, but that comes second to the pbss setup. If anybody knows what im doing wrong, let me know please! Heres the pbsv.cfg:

pb_sv_logaddr ""
pb_sv_logport 13750
pb_sv_loguser "AAPGACI"

; ------------------------------
; General Settings
; ------------------------------
pb_sv_MsgPrefix "^5PunkBuster Server"
pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)]
pb_sv_MaxSendRate 8 // [speed at which PB Server sends pbcl and pbag updates in KBps (default=8)] 
pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]
pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
pb_sv_PowerMin 10 //[Power Points]
pb_sv_PowerDef 1 //[Power Points]
pb_sv_PowerKickLen 5 //[Minutes (default=5)]
pb_sv_DupNameGrace 0 //[Seconds]
pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)]
pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]

; ------------------------------
; Other Settings
; ------------------------------
pb_sv_Restrictions 1 //[Kick for Restrictions 0=No, 1=Yes (default=1)]
pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
pb_sv_LogFloor 1 //[Low log filename serial #]
pb_sv_MinName 0 //[Min Characters in Player name (default=0)]
pb_sv_MaxName 0 //[Max Characters in Player name (default=0)]
pb_sv_LanMask "" //[IP Address Mask for LAN Players (default=)]
pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
pb_sv_ChangePeriod 300 // For pb_sv_ChangeMax
pb_sv_ChangeMax 5 // [Max name changes allowed in pb_sv_ChangePeriod] ex 5 changes in 300 seconds

; ------------------------------
; Kick Settings
; ------------------------------
pb_sv_KickLen 5 //[Minutes (default=2)]
pb_sv_ScoreKick 0 //[Min score (negative) ]
pb_sv_UpdateGrace 2400 //[Seconds to wait before Update Failure kick]
pb_sv_NoGuidGrace 10 //[Seconds to wait before No GUID kick]

; ------------------------------
; PBSS Settings
; ------------------------------
pb_sv_AutoSs 1 //[0=No, 1=Yes (default=0)]
pb_sv_SsFloor 1 //[Low screenshot filename serial #]
pb_sv_SsCeiling 1500 //[High screenshot filename serial #]
pb_sv_AutoSsFrom 300 //[Min # of seconds to wait before requesting next ss]
pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss]
pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
pb_sv_SsWidth 400 //[Requested pixel width of remote screenshots]
pb_sv_SsHeight 204 //[Requested pixel height of remote screenshots]
pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]
pb_sv_SsSrate 1 //[Sample Rate for remote screenshots]
pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot]
pb_sv_SsPath "" //[Path where remote screenshots are saved]
pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
pb_sv_ssTimeout 300 //[Seconds]

; ------------------------------
; Web Tool Settings
; ------------------------------
pb_sv_HttpPort 7778 //[Port #]
pb_sv_HttpAddr "" //[External IP Address]
pb_sv_HttpKey "_______" //[Password]
pb_sv_HttpRefresh 30 //[Seconds]
pb_sv_HttpMaps "" //[Map list (separate by spaces)]
pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]
pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColBack1 "000000" //[Background Color #1 in WebTool (default=000000)]
pb_sv_HttpColBack2 "808080" //[Background Color #2 in WebTool (default=808080)]
pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]
pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)]

; ------------------------------
; CVAR Settings (Only for supported games)
; ------------------------------
pb_sv_CvarFreq 3 //[# of range checks per minute]
pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
pb_sv_CvarWalk 2 //[0=disabled, 1-4=Walk through obtained Cvar lists]
pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)]
pb_sv_CvarChangedPulse 60 //[Frequency to auto-send CvarChanged (minutes)]

; ------------------------------
; Alias Settings (Only for supported games)
; ------------------------------
pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")]
pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID]
pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]

; ------------------------------
; PB Tasks (pb_sv_task [start delay (seconds)] [repeat (seconds)] [command])
; ------------------------------
pb_sv_task 0 7200 pb_sv_ver // Keep-Alive for PBBans Hub
pb_sv_task 0 86400 pb_sv_update // Check for PB updates daily

; ------------------------------
; Badname List (pb_sv_badname [grace_period_secs] [disallowed text])
; ------------------------------
;pb_sv_badname 10 server // Sample

; ------------------------------
; IP Guard 
; ------------------------------
;pb_sv_ipguard // Sample

; ------------------------------
; Cvar List
; ------------------------------

; ------------------------------
; Protected Tags
; ------------------------------
pb_sv_protecttag 1 PBSTAFF
pb_sv_protecttag 1 PBBans

; ------------------------------
; Load Ban List
; ------------------------------

; ------------------------------
; Load IP Bans
; ------------------------------
;pb_sv_banmask ""  // Sample

; ------------------------------
; PB UCON Settings / Lists
; ------------------------------
pb_sv_usessionlimit 9
pb_sv_ucontimeout 90
pb_sv_uconadd 1 "pbbhub1" "pbbanshub"

; ------------------------------
; Exec Configs
; ------------------------------
pb_sv_load pbsvuser.cfg
pb_sv_load pbsvlog.cfg


  • weakness_aaweakness_aa Posts: 149Player
    edited April 2016
    I believe the filename now needs to be pbsvuser.cfg. Stop your server, Rename the pbsv.cfg file to pbsvuser.cfg. Restart your server. I would also remove the line under ;Exec Configs pb_sv_load pbsvuser.cfg. That way it doesn't get loaded twice.
  • m_hermannm_hermann Posts: 656Moderator
    either file name is fine, some providers load a specific file, some do not. Either way, after using the pb_sv_enable........

    The command "PB_SV_LOAD" takes one parameter (a filename), typing in "PB_SV_LOAD ABC.CFG" tells PunkBuster to load the PB configuration file called "ABC.CFG".
  • Theodore_BundyTheodore_Bundy Posts: 68Player
    I believe the filename now needs to be pbsvuser.cfg. Stop your server, Rename the pbsv.cfg file to pbsvuser.cfg. Restart your server. I would also remove the line under ;Exec Configs pb_sv_load pbsvuser.cfg. That way it doesn't get loaded twice.

    Either file will work. By default, pbsv.cfg is loaded. In my experience, that's typically used for settings that you don't want to change that often. Then you make your changes in pbsvuser.cfg and add the loading line to the bottom of pbsv.cfg.

    Just usinb pbsv.cfg will work fine.
    Steam: usdod14
  • {DH}=CRAZYCANUCK44{DH}=CRAZYCANUCK44 Posts: 34Player
    I cannot get the webtool to work.
    Also does the ~ console in game execute pb commands?
    Since I cannot get the webtool to I have no other way then to restart the server..
  • m_hermannm_hermann Posts: 656Moderator
    "pb_sv_ " commands should work, might have to preceed with "admin"
  • ^AWA^-=Poo=-aloced^AWA^-=Poo=-aloced Posts: 66Player
    I can't seem to get "admin pb_sv_" commands to work in game. Are these working?

    I do have webtool working fine, but it would be nice to be able to run pb_sv_ commands in game.

    Note: I am logged in as admin and I have the punkbuster commands turned on (settings->misc).
Sign In or Register to comment.