Honestly, I suspect the easiest way is to delete the bomb, add a new one and re-setup the Objectives. Surely a new bomb won't have the same issue. The editor gives me 'external references' when I open your map from the Workshop folder. That might be just because of where it's saved though...
______
This has been a test of the emergency flame-fest system. Please do not adjust your set.
Rly.. I thought I read STL somewhere, which is weird cause it shows that as "certificate trust list" .. I was scratching my head on that one.. but I went with it.. Thanks Lobo.. ill resave as FBX and try again.
Edit.. unfortunately fbx is not a format solidworks 2012 can save as.. and from what I see there is no export
Thanks Ground, having technical difficulties with the bomb atm
Yeah once you add in the bomb your gonna need to edit some properties (highlight bomb and hit F4) to assign it to a team and all that kinda stuff.. as well as include it in your mission flow in the objective editor.
If my trollery drives you crazy, you'd better put on your seatbelt.
It's a shame there aint a simple "AA_AddBombThatIsAlreadyConfigured" actor
Here's a real handy tutorial wolvie did that covers setting up objectives, it's not exactly on the bomb kind but it should steer you in the right kinda direction
It's a whole lot easier when your starting out with a template in the basic ME as you choose the obj's and team sizes etc.. then when you hit OK it does most all the leg work for you, leaving you to work on the map, move the Obj's about then simply setup the mission flow.
Since you mistakenly broke it somehow.. (which 99% of learning comes from making mistakes) your basically now having to set it all back up yourself, as daunting as it gets and seems at times, it's massively rewarding when you get it all and master it though and the more what you learn you'll find applies to many things
If my trollery drives you crazy, you'd better put on your seatbelt.
As instructed in the other post on bomb, I can copy / paste and if worst come to worst I can just look at the properties of a stock map and make it the same
And I watched that video last night .. well skimmed threw it looking for c4 setup
As instructed in the other post on bomb, I can copy / paste and if worst come to worst I can just look at the properties of a stock map and make it the same
That'll work
If my trollery drives you crazy, you'd better put on your seatbelt.
Just remember that you have to figure out which team is which when you specific objective properties. You CAN'T totally cut/paste that stuff or next thing you know your defense is planting the bomb!
Your spawns will have Team 0 and Team 1 codes, which will help.
______
This has been a test of the emergency flame-fest system. Please do not adjust your set.
I did it, I did it.. and by "I", I mean "We" did it !! we did it..
Released !! Sitrep:
- properly working bomb
- entrance added to Z
- Sniper Stairs added to leaning tower
- Cover added to Mid
- Water instant damage
- fixed various areas where you can leave the map
Low blow.. I didn't get a chance to check cause our match lasted ovee 2 hrs last night..
But I can't picture it... seems those steps are so far away from other buildings
Comments
It's now banned after the
latest update.
#Support Comp Mode
https://www.youtube.com/channel/UCN4YhM6jUB2MxVj8i3b9rhw
This has been a test of the emergency flame-fest system. Please do not adjust your set.
#Support Comp Mode
https://www.youtube.com/channel/UCN4YhM6jUB2MxVj8i3b9rhw
Edit.. unfortunately fbx is not a format solidworks 2012 can save as.. and from what I see there is no export
any other formats UDK reads?
#Support Comp Mode
https://www.youtube.com/channel/UCN4YhM6jUB2MxVj8i3b9rhw
Yeah once you add in the bomb your gonna need to edit some properties (highlight bomb and hit F4) to assign it to a team and all that kinda stuff.. as well as include it in your mission flow in the objective editor.
#Support Comp Mode
https://www.youtube.com/channel/UCN4YhM6jUB2MxVj8i3b9rhw
Here's a real handy tutorial wolvie did that covers setting up objectives, it's not exactly on the bomb kind but it should steer you in the right kinda direction
It's a whole lot easier when your starting out with a template in the basic ME as you choose the obj's and team sizes etc.. then when you hit OK it does most all the leg work for you, leaving you to work on the map, move the Obj's about then simply setup the mission flow.
Since you mistakenly broke it somehow.. (which 99% of learning comes from making mistakes) your basically now having to set it all back up yourself, as daunting as it gets and seems at times, it's massively rewarding when you get it all and master it though and the more what you learn you'll find applies to many things
And I watched that video last night .. well skimmed threw it looking for c4 setup
#Support Comp Mode
https://www.youtube.com/channel/UCN4YhM6jUB2MxVj8i3b9rhw
That'll work
Your spawns will have Team 0 and Team 1 codes, which will help.
This has been a test of the emergency flame-fest system. Please do not adjust your set.
Released !! Sitrep:
- properly working bomb
- entrance added to Z
- Sniper Stairs added to leaning tower
- Cover added to Mid
- Water instant damage
- fixed various areas where you can leave the map
Thank you all for the feedback and help
#Support Comp Mode
https://www.youtube.com/channel/UCN4YhM6jUB2MxVj8i3b9rhw
You can run up the railing jump on the roof next to tower.
It's now banned after the
latest update.
ty
#Support Comp Mode
https://www.youtube.com/channel/UCN4YhM6jUB2MxVj8i3b9rhw
This has been a test of the emergency flame-fest system. Please do not adjust your set.
But I can't picture it... seems those steps are so far away from other buildings
#Support Comp Mode
https://www.youtube.com/channel/UCN4YhM6jUB2MxVj8i3b9rhw
Yeah, and those Devs, everytime the release something , something else is borked!
My Portfolio / Site