sapphire helps r9
in Game Support
I bought a graph sapphire try-r9 290 x 4GB DDR5. the game after 5 min of run stops going fluid and jerks. I need help setting up the graphics card. Thank you
Comments
This has been a test of the emergency flame-fest system. Please do not adjust your set.
_________________________
********Bam4D********BE ALL (THAT) YOU CAN BE!
________Army 1980_________
Windows 10 is the problem persists. I think the graphics card is good enough to move that game, when moving in ultra me gta v, Far Cry 4 ..... there will be some settings that I do not know?
It would also help us if you list your setup. CPU, MOBO, SSD/HDD ect..
Twitch Channel|Steam
my pc is: tacens aimentacion source 800w gaming mars. Sapphire card R9 290 Tri-X UEFI 4GB GDDR5. AMD Socket AM3 Motherboard Gigabyte GA-990FXA-UD5. G.Skill Sniper DDR3 1866 8GB PC3-14900 DDR3 1866 CL9 2x4GB. Hard Drives Crucial M500 SSD 240GB SATA3 SSD. AMD Socket AM3 AMD FX Series FX-8350 Black Edition 4.0GHz 8X.
Twitch Channel|Steam
Delete the whole folder config folder for the game (make a backup if you wish) after turning off the game client and then reopen AA:PG. It should bring you to a windowed mode. From there, reset your graphics settings and test the game while MSI Afterburner or RealTemp/etc runs in the background. Alt-tab to them and check temps and speeds mid-game, especially before the problem and then after it occurs.
If you haven't done so yet, uninstall previous graphics drivers, reboot and then install this driver for your card: http://support.amd.com/en-us/download/desktop?os=Windows+10+-+64
Also install the latest drivers for your motherboard:
http://www.gigabyte.com/products/product-page.aspx?pid=3891#dl
And any other driver. Reboot after installing them. Now open MSI Afterburner and reset the graphics card, to make sure you do not have an unstable OC. The default skin should read the reset button off as "reset". Then hit apply (if need be) and then test your game, keeping an eye on temps and speed with the programs listed.
If the problem persists, please write down the base temp, before gaming, and the temps before the problem and then the temps after the problem/during the problem. As well as the speed of the card.
"I love the Union and the Constitution, but I would rather leave the Union with the Constitution than remain in the Union without it." — Jefferson Davis
_________________________
********Bam4D********BE ALL (THAT) YOU CAN BE!
________Army 1980_________
I have never even heard of his brand of PSU, so that is probably the reason for sure.
"I love the Union and the Constitution, but I would rather leave the Union with the Constitution than remain in the Union without it." — Jefferson Davis
This may sound stup** but ive seen this before;
check if high performance is set for AA Profile (CCC)
you seem to post on every thread whether you know or not?
Make sure your gfx card and cpu temps are staying good amd and NVidia both have the ability to lower clock speeds to reduce temps which could possibly be cause your issue. also make sure you have your windows and bios settings to performance and not power saving mode. gl hope you get her running smooth..
I have amd cpu and I had an issue in windows 10 that did that so reverted back to windows 7 I thought it was the network driver but wasn't for sure.
I know we have seen issues with Win 10 and also with R9 cards, but I'm not the graphics guru around here.
I will say it's nice to feel noticed though. Thanks!
This has been a test of the emergency flame-fest system. Please do not adjust your set.
Just like with stress testing, no software will perform alike. But it doesn't necessarily mean it isn't the issue. However, we could provide further assistance if he can give us a bit more information.
"I love the Union and the Constitution, but I would rather leave the Union with the Constitution than remain in the Union without it." — Jefferson Davis