Auth Issues

NoDozeNoDoze Posts: 11Player
Log: Data not yet available
ScriptLog: INFORMATION: Server is not authorized, requesting authorization again.
NetComeGo: Open TheWorld 05/14/15 16:41:17 234.XXX.XXX.XXX:55585
NetComeGo: Close TcpipConnection_11 234.XXX.XXX.XXX:55585 05/14/15 16:41:17
NetComeGo: Open TheWorld 05/14/15 16:41:22 234.XXX.XXX.XXX:55586
NetComeGo: Close TcpipConnection_12 234.XXX.XXX.XXX:55586 05/14/15 16:41:23
NetComeGo: Open TheWorld 05/14/15 16:41:28 234.XXX.XXX.XXX:55587
NetComeGo: Close TcpipConnection_13 234.XXX.XXX.XXX:55587 05/14/15 16:41:28
NetComeGo: Open TheWorld 05/14/15 16:41:33 234.XXX.XXX.XXX:65056
NetComeGo: Close TcpipConnection_14 234.XXX.XXX.XXX:65056 05/14/15 16:41:33
NetComeGo: Open TheWorld 05/14/15 16:41:38 234.XXX.XXX.XXX:65057
NetComeGo: Close TcpipConnection_15 234.XXX.XXX.XXX:65057 05/14/15 16:41:39
NetComeGo: Open TheWorld 05/14/15 16:41:43 234.XXX.XXX.XXX:65058
NetComeGo: Close TcpipConnection_16 234.XXX.XXX.XXX:65058 05/14/15 16:41:44

I emailed support over a week ago with no response.

Having the same issues with both aa3 and aapg servers.
Both IPs are registered.

Anyone in here can help?

Thanks

Comments

  • m_hermannm_hermann Posts: 656Moderator
    not with so little information.

    Provider name?
    a little more log please, including the commandline (less username and password)
  • NoDozeNoDoze Posts: 11Player
    C:\TCAFiles\Users\User\227\Binaries\AA3Game.exe server Bridge_night_clear?GLOBAL?EnableTS3=N?MissionType=co?MissionSize=large?MissionTourID=inf?MissionVariant=ai?MaxPlayers=20?MaxSpectators=4?AuthServerUserName=User?AuthServerPassword=Password?AuthServerIP=XXX.XXX.XXX.XXX?AuthServerPort=8777 /STEAMSERVERIP=XXX.XXX.XXX.XXX-CONFIGSUBDIR=OGConfig MULTIHOME=XXX.XXX.XXX.XXX

    Provider is OorahGaming.com
  • m_hermannm_hermann Posts: 656Moderator
    Maybe one of the old AA3 server admins can help, we've been on the new version for a while.
  • NoDozeNoDoze Posts: 11Player
    Huh!?! Server files were downloaded from Steam. Where would I get the new files?
  • NoDozeNoDoze Posts: 11Player
    Huh!?! Server files were downloaded from Steam. Where would I get the new files?
  • NoDozeNoDoze Posts: 11Player
    Server version number is 3.3, what is newer?
  • m_hermannm_hermann Posts: 656Moderator
    AA:PG
  • NoDozeNoDoze Posts: 11Player
    Ok. To clarify....
    The thread was created about aa3.
    The command line I posted is for aa3.
    I mentioned however im having the same issue with aapg.

    You are saying aa3 files are old? Is it not supported anymore? Not supported via steam?

    Are aapg steam files outdated? Where would I get the new files?

    Thanks for the clarification.
  • GBGangstaGBGangsta Posts: 63Developer
    In your \Binaries Folder find the file called masconfig.ini and replace the server entries with :smile:
    # Local
    # 127.0.0.1

    # TRIDMAS2
    12.181.24.44
    # 10.4.10.53

    # TRIDMAS3
    12.181.24.45
    # 10.4.10.54

    # SEDVPNMAS
    # 69.73.18.118

    That may help.
  • NoDozeNoDoze Posts: 11Player
    edited May 2015
    Updated the masconfig.ini, it was set to something different...
    I tried to paste the log output but the forum says it's too long.
    And the forum doesn't allow for attachments so...
    As much as I don't want to link to it, here it is...
    aa3log.txt
  • NoDozeNoDoze Posts: 11Player
    Can anyone tell me what's going wrong here!?!
  • NoDozeNoDoze Posts: 11Player
    Can I get some input? This issue still hasn't been resolved. Thanks
  • GBGangstaGBGangsta Posts: 63Developer
    It's hard to tell from the log snip, does it ever auth? If not the other things to check are ports and firewalls. Make sure there isn't another game running on the same box that would conflict on ports such as AAPG. Also make sure the firewall config is correct
  • NoDozeNoDoze Posts: 11Player
    No other game running on the server. Firewall off.
  • m_hermannm_hermann Posts: 656Moderator
    edited May 2015
    GBGangsta wrote: »
    It's hard to tell from the log snip, does it ever auth? If not the other things to check are ports and firewalls. Make sure there isn't another game running on the same box that would conflict on ports such as AAPG. Also make sure the firewall config is correct

    There's a link to the full log in reply #11
    NoDoze wrote: »
    Updated the masconfig.ini, it was set to something different...
    I tried to paste the log output but the forum says it's too long.
    And the forum doesn't allow for attachments so...
    As much as I don't want to link to it, here it is...
    aa3log.txt
  • NoDozeNoDoze Posts: 11Player
    I've uploaded a new AAPG log file.
    This is Windows Server 2012 Standard, Firewall Off.

    When running the server it will loop this:
    [0077.58] NetComeGo: Open TheWorld 05/26/15 09:11:47 192.3.20.42
    [0078.01] NetComeGo: Close TcpNetDriver_0 TcpipConnection_3 192.3.20.42:62942 05/26/15 09:11:47
    [0080.15] ScriptLog: WARNING: MASS did not have valid server mode for non-LAN server. Trying again in 15.0000 seconds.
Sign In or Register to comment.